|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Hydraulic Anchor Winch | Material: | Q355B |
|---|---|---|---|
| Lifting Speed: | 30m/min | Produce Equipment: | Hydraulic |
| Rope Capacity: | 50m | Application: | Offshore |
| Brake: | Belt Brake | Color: | As Required |
| Pulling Force: | 30-50T | Drum Type: | Smooth |
| Highlight: | offshore hydraulic anchor winch,30t capacity hydraulic anchor winch,30m rope speed hydraulic anchor winch |
||
The working principle of hydraulic transmission is to use the pressure energy of the liquid to transfer power, and the pressure energy of the liquid is converted into mechanical energy to drive the movement of the working parts. The hydraulic system must control and adjust the oil pressure, flow rate and direction to meet the requirements of force, speed and direction of the working parts.
| Product name | Hydraulic crane winch |
| color | yellow /black /gray/as customes |
| size | 35*35*20 |
| Pull | 8/10/15/20 |
| layer | 1-7 |
| Wire rope capacity | 17-230 |
| Hydraulic motor | As customes |
| Planetary reduction ratio | I=5.23 |
| L/min |
As customes |
Product Outline Drawing:
|
Model |
Pull force (KN) |
Rope speed (m/min) |
Drum bottom Diameter (mm) |
Difference of working pressures (Mpa) |
Rope capacity (mm) |
Diameter of steel rope (mm) |
Model of hydraulic motor |
|
LBSW-DN10-10-00 |
10 | 0-40 | 250 | 13 | 100 | 10 | C2.5-5.5 |
| LBSW-DN12-18-00 | 12 | 0-40 | 250 | 12.5 | 100 | 12 | C2.5-5.5 |
| LBSW-DN14-20-00 | 20 | 0-35 | 300 | 12 | 100 | 14 | C2.5-5.5 |
| LBSW-DN15-30-00 | 30 | 0-30 | 350 | 14 | 100 | 15 | C3-5.5 |
| LBSW-DN22-65-00 | 65 | 0-35 | 550 | 15 | 200 | 22 | C5-5 |
| LBSW-DN24-80-00 | 80 | 0-30 | 600 | 16 | 200 | 24 | C5-5.5 |
| LBSW-DN30-120-00 | 120 | 0-30 | 750 | 16 | 200 | 30 | C7-5.5 |
| LBSW-DN38-180-00 | 180 | 0-30 | 860 | 16 | 200 | 38 |
C7-5.5
|
The sound standard of winch should be carried out according to the corresponding national standard.
The condition of the winch belongs to the condition of the equipment. Its basic contents include: (1) good equipment performance; (2) Normal operation of equipment, such as parts wear, corrosion degree does not exceed the technical standards, lubrication system is normal, equipment operation without overtemperature, overpressure phenomenon; (3) The consumption of raw materials, fuel and oil is normal, and there is no leakage of oil, water, steam and electricity. Specific standards should also be set for different types of equipment.
Contact Person: Miss. Wang
Tel: 86+13315131859
Fax: 86-311-80761996
