Product Details:
Payment & Shipping Terms:
|
Product Name: | Lebus Grooved Drum | Material: | Cabon Steel |
---|---|---|---|
Groove Type: | Lebus Grooves | Made Of: | Steel Plate Or Seamless Steel Pipe |
Dia.of Rope: | 2~60mm | Layers: | 2~60 Layers |
Grooving Machining: | CNC Machining | Warranty: | 12 Months |
Highlight: | steel cable grooved drum,multi layer winding grooved drum,electric power towing winch grooved drum |
LBS drum is a kind of groove for multi-layer winding of wire rope introduced from abroad. Because of this rope groove in the drum
Most of the circumferential section is kept parallel to the flange end face, only in a very small section and the flange end face intersection,
However, there is a phenomenon of turning, it is named "folding rope groove" too.
Years of practical use has proved that this kind of drum with special rope groove structure can well solve the difficulty of multi-layer winding rope
The double folding cable groove system ensures that the multi-layer winding wire rope on the drum is completely smoothly drawn into and rolled out of the drum.
The towing winch, consists of drum, brake, clutch, wall frame, base, rope arrangement, driving device and the corresponding control device. Its most important role is to connect the tugboat and the object to be towed, and bear the corresponding load load, but also play the role of rope, rope and storage wire rope. The winch is divided into single drum, double drum and multi drum according to the number of drums, according to the power source of electric, hydraulic, diesel engine and steam power, domestic large towing winch is generally driven by hydraulic pressure.
Adopting plate blanking roll cylinder and weld longitudinal welds, checking longitudinal welds and geometric dimensions of cylinder (diameter, length, inner diameter ellipticity tolerance, etc.). For large diameter cylinder, adding welding process reinforcement and machining annular groove of cylinder. There are requirements for the process of roughing the cylinder outside the circle to process the outer circle, cylinder length welding (namely ring seam welding). For the two ends of the cylinder need to add welding process reinforcement according to the process regulations, and check the quality of ring welding and machining allowance, cylinder length processing and both ends of the stop or groove processing and welding cylinder end flange plate, shaft, inner support ring, etc.
Drum Quantity | Single Or More |
Drum Design | LBS Groove |
Material | Carbon Stainless And Alloy Steels |
Size | Customization |
Application Range | Construction Mining Terminal operation |
Power Source | Electric And Hydraulic |
Rope Capacity | 50~800M |
No | Wire diameter(mm) | Rotation direction | Main drum diameter(mm) |
Main drum length(mm) | Application |
1 | 8 10 13 | Lefthand,Righthand | 430 | 763 | The oil workover rig winch, Towing winch Tower crane |
2 | 13 18 20 | Lefthand,Righthand | 623 | 1144 | Engineering winch, Lifting winch,Crawler crane |
3 | 22 25 26 | Lefthand,Righthand | 730 | 1220 | Oil workover rig , Logging Winch |
4 | 18 22 32 | Lefthand,Righthand | 670 | 1240 | Drilling Rig Winch, drawworks |
5 | 28 32 36 40 | Lefthand,Righthand | 560 | 630 | Rotating Drilling Rig winch, Lifting equipment |
6 | 26 28 32 45 | Lefthand,Righthand | 760 1146 | 1970 1765 |
Offshore Crane, |
Contact Person: Marie
Tel: 86+13315131859
Fax: 86-311-66692276