|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | 1.5T Electric Rope Winch | Material: | Steel |
|---|---|---|---|
| MOQ: | 1 Set | Produce Equipment: | CNC Center |
| Traction Force: | 1.5-2T | Application Range: | Shipyard Oil Mining |
| Hoist Speed: | 0.95-1.27m/s | Rotate Speed: | 7m/min |
| Rope Diameter: | 6-8mm | Direction Rotation: | Left Or Right |
| Highlight: | 2200t electric lifting winch,wind power generation electric lifting winch,2200t electric rope winch |
||
|
Other name |
2200T Heavy Duty Electric Lifting Winch For Wind Power Generation Installation Vessel |
|
Power |
Eletric |
|
Rope speed |
7m/min |
|
Rope diameter |
30-60mm |
|
Sling type |
wire rope |
|
Direction rotation |
Left or right |
|
Application |
lifting winch |
|
Parameter |
Can be designed |
|
Protection class |
IP65 |
|
Motor |
AC380V/50Hz |
|
Drum width |
900-1800mm |
The winch converts the electric energy into mechanical energy through the motor, that is, the rotor of the motor rotates the output, through the triangle belt, shaft, gear, and then drives the drum to rotate after deceleration. The reel winds the wire rope and passes through the pulley block to make the crane hook lift or drop the load, change the mechanical energy into mechanical work, and complete the vertical transport loading and unloading work of the load.
The most important note here is the state of the rope drum, which must be used to ensure that the lasso is evenly wound before the process begins. The installation process is as follows:
1. Plug in the remote control. Connect the distal end of the first plug-in winch.
2. Do not let the remote connection hang. If you are a driver, operate the remote control from the driver's seat and then make additional connections around the side mirrors of the car to make co-working easier.
3. Open the noose, use the remote control to open the noose a bit, and install it on the side of the electric winch.
Turn on the clutch. Please note that we have to open the hook later to open the clutch.
5. Hold the rope hook hand. Grabbing the hook with one hand pulls the rope out of the roller, so no matter how long the rope has been twisted, it doesn't reach the hook.
6. Pull the rope on the pivot and lock the clutch.
So the electric winch is installed.
The pulling winch consists of several parts, which are connected in series by wire rope. The working principle is to drive the whole system by the friction between the friction wheel and the wire rope, and the friction wheel is connected with the drive device. Generally, the width of the winch is within 1.5 m, which ensures the compactness and reliability of the entire transport unit. The traction winch is provided with tensioning device,
Shijiazhuang Junzhong Machinery Manufacturing Co., Ltd. was established in 2010 with a registered capital of 18 million yuan.
The company is a long-term engaged in cable retracting system of scientific and technological production enterprises in the multi-layer winding of wire rope has a profound foundation and production experience.
the company obtained the utility model patent certificate suitable for multi-layer winding lebus groove in 2010 and registered the LBS trademark in 2013.
Passed iso9001:2015 quality management system certification in 2017;
In 2018, it passed the GJB9001C-2017 weapon equipment quality management system certification.
In 2019, the company was identified as a science and technology smes in Hebei Province.
In recent years, the company with strong technical strength, advanced production equipment, strict quality control system, achieved rapid development.
Contact Person: Wang
Tel: 86+13315131859
Fax: 86-311-80761996
