|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Lebus Grooved Cable Winch Double Drum | Drum Quantity: | Double |
|---|---|---|---|
| Drum Design: | LBS Groove Or Spiral Groove | Material: | Carbon Stainless |
| Size: | Customization | Application Range: | Building |
| Power Source: | Electric | Rope Capacity: | 100~300M |
| Rope Diameter: | 6mm/8mm/12mm | Surface Status: | Hot Spray Zinc Or Spray Paint |
| Highlight: | Carbon Steel Cable Winch Drum,Lebus Grooved Cable Winch Drum |
||
Drum is one of the important parts of lifting machinery, used to wind wire rope in lifting mechanism or traction mechanism.By transferring the driving force provided by the hydraulic or electric drive device to the wire rope, the rotary motion of the drive device is transformed into the linear motion required.
| ther name: | special lebus grooved carbon steel wire rope Double Cable Winch Drum |
| Hoist speed | 0.95-1.27m/s |
| Rotate speed | 720-960 r/min |
| Rope diameter | 3-30mm |
| Sling type | wire |
| Direction rotation | left or right |
| Application | hoist |
| Parameter | can be designed |
| Application | mining,oil drilling,or coal mine |
| Drum diameter | 900mm |
| Drum width | 600mm |
Double drum hoist, double hook hoist. Two wire ropes are fixed on a drum, respectively, from the drum, from the bottom of the drum, when the drum rotates, one lifting container up, the other container down.
Winding hoist is divided into equal diameter hoist and variable diameter hoist according to the shape of the drum. The structure of equal-diameter drum is simple, easy to manufacture, low price, and is widely used. When deep well is being raised, the torque is very unbalance because of the great variation of the length of the rope on both sides. Early use of variable diameter hoist (cylindrical conical drum), now more use of tail rope balance.
1, the winch must be set according to the specification requirements. Its specification net height is not less than 2.0 meters, net width is 2.4 meters, net depth is 2.0 meters. The roadway along the air supply is determined according to the actual situation of the roadway, and the principle is not to affect the safe operation.
2, winch construction as far as possible to use pick excavation, according to the different support type of roadway can be used to support wooden shed or I-steel shed. Anchor mesh support is used when the roof is intact, and scaffolding support is used when the roof is broken
3, 11.4KW small winch foundation should use concrete pouring, its basic specification is 1.0×1.0×1.0 meters. Concrete cement, sand, stone (melon seed pieces) mix ratio of 1:2:2; Water cement ratio is 0.4.
4, the winch used scaffolding support, from the outside to the frame, between the shed and the shed with support wood or pull rod connected into a whole, waist, help to be strict back solid. The distance between the shed shall not exceed 0.7 m. When anchor mesh support is used, the spacing of bolt rows is 800×800mm.
5. The winch motor should be installed in the inner side of the small winch nest, and the operating space shall not be less than 0.8 meters; The operation button is on the shelf, and the switch is placed neatly and shall not hinder the operation of personnel.
6, other provisions in accordance with the operation procedures.
Processing Equipment: CNC Machining Center
Rotation Direction Of Grooves: Lefthand
Wire Rope Diameter: 3 MM~65 MM
Each Layer Laps: 20.5 laps
Layer: 5 Layer
Rope Groove Type: LEBUS Rope Groove
Number Of Ropes: Two
Contact Person: Wang
Tel: 86+13315131859
Fax: 86-311-80761996
